|
|
EQ3001 EQP Controller
The certified SIL 2 Det-Tronics Eagle Quantum Premier Fire and Gas Detection/Releasing System serves multiple roles in the monitoring and protection of hazardous areas.
MORE
|
|
|
|
|
|
SIL 2 exida certified
The SIL 2 EQP system provides customers a solution that fills the needs of both a Safety Instrumented System and an approved fire and gas detection system (FM approved to NFPA-72-2010).
VIEW CERTIFICATE
|
|
|
|
|
|
SAFETY SYSTEM SOFTWARE
EQP Safety System Software (S3) provides a full featured data aquisition, display and configuration package.
MORE
|
|
|
|
|
|
X3301 MULTISPECTRUM IR FLAME DETECTOR
This SIL 2 certified flame detector excels in applications with high background radiation levels, such as turbine packages or off-shore facitilies.
MORE
|
|
|
|
|
|
X3302 HYDROGEN FLAME DETECTOR
The X3302 brings state-of-the-art flame detection to the difficult task of detecting invisible hydrogen flames without false alarms typical of traditional technologies.
MORE
|
|
|
|
|
|
X5200 UVIR FLAME DETECTOR
The X5200 is suited for applications such as aircraft hangers that could UV radiation sources present.
MORE
|
|
|
|
|
|
X9800 IR FLAME DETECTOR
The single frequency infared X9800 is designed for high-pressure hydrocarbon flame detection or where high speed response and contamination resistance is critical.
MORE
|
|
|
|
|
|
X2200 UV Flame DETECTOR
For controlled environment applications requiring high speed response, the X2200 UV detector is the choice.
MORE
|
|
|
|
|
|
POINTWATCH (PIRECL) IR GAS DETECTOR
The PIRECL Pointwatch Eclipse IR gas detector (SIL 2 certified) delivers the highest quality hydrocarbon gas detection performance available.
MORE
|
|
|
|
|
|
EQ3730 EDIO Enhanced Discrete I/O Module
The certified SIL 2 8-channel EDIO module provides continuous and automated fire/gas protection while ensuring system operation through continuous supervision of system inputs/outputs and signaling line circuit (SLC). This module provides eight channels that can be configured as input/output, two-wire smoke/heat detectors, Class A input, or Class A output.
MORE
|
|
|
|
|
|
EQ3710 AIM ANALOG INPUT MODULE
The 8-channel Analog Input Module provides a means of connecting devices with a 4-20mA output signal to the system.
MORE
|
|
|
|
|
|
EQ3720 RM RELAY MODULE
This module provides eight channels of relay output points that are programmed for unsupervised operation.
MORE
|
|
|
|
|
|
EQ3750 Addressable smoke and heat (ASH) Module
The ASH Module provides a means of connecting addressable smoke and heat detectors to the system and therefore enables classified non-hazardous industrial areas (living quarters and control rooms) to be monitored by the same EQP system monitoring classified-hazardous areas.
MORE
|
|
|
|
|
|
EQ3740 IPM INTELLIGENT PROTECTION MODULE
The Intelligent Protection Module (IPM) provide continuous and automated local area fire protection, while monitoring system operation through continuous supervision of its inputs/outputs and Local Operating Network/Signaling Line Circuit (LON/SLC).
MORE
|
|
|
|
|
|
EQ2200 DCU/DCUEX DIGITAL COMMUNICATION UNIT
The DCU is approved for use with a variety of Det-Tronics sensors including Pointwatch IR gas detector and hydrogen sulfide (H2S) eletrochemical sensor. The DCUEX adds the flexibility to bring any 4-20mA input.
MORE
|
|
|
|
|
|
EQ2200 IDC INITIATING DEVICE CIRCUIT
The IDC consists of a terminal wiring board and a communication module, mounted in an explosion-proof, water tight enclosure.
MORE
|
|
|
|
|
|
Obsolete products
Products listed in this section are no longer in production, but may have replacement spare parts available. Click here for suggested factory replacement options and user manuals.
MORE
|
|
|
